Dynamic Cabling are one of the go to structured cabling specialists
Which data cabling company near me can assist with rebuilding, remodelling, or adding POS stations in your retail space?” We hear you – the right cabling is paramount in the retail sector. There are four types of cabling required in a retail space:
· Data and voice lines
· Access and security control
· Fire alarm cabling
· Video surveillance cabling
Data and voice cabling types
In the past, you’d need two types of cables for POS and phone terminals. With the introduction of digital phones, this isn’t the case. You’ll require category five or six cables for your data and voice needs. Each one depends on the speed at which your network runs. The longer cables with high speeds need CAT six cables. If your retail store is in an area with lots of interferences, you may need CAT seven cables, as they add double shielding layers to prevent interference and crosstalk.
Data and voice cabling specifications
This type of cabling is regulated by the requirements provided by the Electronics Industry Association and Telecommunications Industry Association, according to the 568/569 standard. The 568 standard is divided into A and B and shows what order the cables are terminated, while the 569 standard regulates certification and testing standards. It sets limits for far and near-end crosstalk, which measures the amount of signal you can hear on the other cables.
Access and security control cabling
Installation of access and security control by any data cabling company near you covers a wider area, but it’s mostly considered a burglar alarm. If a door is open or closed, the single wiring that runs through the doors sounds the system. Some detectors run through the ceiling that senses the sound of breaking glass. The doors also have sensors that detect radio frequency from loss prevention tags.
Bigger retail stores have some electronic locking systems fitted on back doors or offices. The system has a control panel to arm or disarm the system. Every POS station should have a panic switch with two wires. These cables are connected to these devices with screw terminals.
Video surveillance system cabling
Cameras require two wires for ground and power and a pair of wires to transmit the video signal. This is done by running 18 gauge single wires for power and an RG coaxial cable for the video signal. New systems are installed using hybrid cables. These cables combine video and power into one cable. They use CAT five and CAT six cables like Ethernet jumper cables.
If you’re looking for a data cabling company near you, contact Dynamic Cabling Services. We have professional expertise and are ready to provide any type of cabling service you need.
